What Is the P2199 Code?
Symptoms
Causes
Seriousness
Can I Still Drive?
Diagnose
Difficulty of Inspecting
Get Additional Help
The P2199 code definition is “Intake Air Temperature Sensor 1/2 Correlation.” This code indicates that your powertrain control module (PCM) or engine control module (ECM) has detected a discrepancy in the signals between your different intake air temperature sensors, indicating that there may be an issue with one signal, both signals, or another component of the engine. This generic fault code can show up in any OBD-II-equipped vehicle with multiple intake or ambient air temperature sensors.
More About the P2199 Code
Your intake air temperature sensor (IAT sensor) is part of the process that ensures your engine runs smoothly and efficiently. By measuring the temperature of the air that moves from the air intake system into the engine, the sensor allows your powertrain control module (PCM) to adjust the amount of fuel from your fuel injectors. This can be important because the ambient temperature can impact the density of the air, thus changing the amount of fuel necessary for optimum function. The P2199 OBD-II trouble code indicates that two of your intake air temperature sensors are not correlating correctly, possibly sending out-of-range readings.
Who Has the Lowest Price?
Some service centers will give you an online estimate to compare. Why drive around Town!?
What Are the Symptoms of a P2199 Code?
The most common symptom of the P2199 code is that the check engine light will turn on. Depending on whether your PCM can accurately detect how much fuel it should be injected into the engine, you could also see drivability concerns, such as reduced engine performance and engine hesitation while speeding up. You may also see excessive fuel consumption. However, intake air sensor codes sometimes only show up as a check engine light concern, as the problem may not have a significant impact on your vehicle’s actual drivability.
What Are Some Causes of a P2199 Code?
There are a number of possible causes of the P2199 code, including both mechanical issues and electrical issues. Here are a few problems that can result in this code:
- Problems with mass air flow sensor (MAF sensor)
- Problems with manifold absolute pressure sensor (MAP sensor)
- Intake air temperature sensor failure
- Issues related to general sensor wiring
- Electrical connection concerns, such as wiring harness issues
There are many common mistakes you could make with this error code, like assuming your sensors are just defective and replacing them without actually checking. It’s always important to go through the full diagnostic steps for your vehicle before you make any changes or replacements.
How Serious Is the P2199 Code?
The P2199 code can be fairly serious. If your vehicle isn’t able to accurately determine the intake air temperature, it may not be able to consistently provide the right level of fuel for your vehicle’s proper function. That can lead to general fuel mileage problems, as well as overall issues related to your engine’s proper function. It’s best not to ignore this generic code, as it’ll likely be easier to fix the problem early on than it will be if you continue to ignore it.
Can I Still Drive with a P2199 Code?
Most people will still physically be able to drive their vehicles with the P2199 code active. However, this doesn’t necessarily mean that it’s a good idea. In general, the longer you wait to handle a diagnostic trouble code, the more difficult it’ll be to eventually solve the problem. Especially when it comes to engine codes, you may end up seeing more serious and more expensive problems if you don’t fix issues like code P2199 early on.
How Easy Is It to Diagnose a P2199 Code?
Diagnosing any fault code can be a bit difficult, primarily because the problem rarely has a direct fix that everyone can utilize. You’ll need to look at your vehicle’s service manual, use your scan tool to check for any other codes, and possibly perform unrelated repairs that could be causing the P2199 code. If you don’t know how to use a diagnostic scanner and check for more than just the obvious components related to the P2199 code, it might be best to talk to an expert about fixing the problem.
How Difficult Is It to Inspect a P2199 Code?
Inspection can also be a difficult process, like diagnosis. One of the reasons for this is that there are often many trouble codes impacting your vehicle. For example, you may need a multimeter to check for things like the proper supply voltage, which can help you determine whether there’s just an issue with your sensor’s output signal or whether there’s a more in-depth issue. This inspection process can be quite difficult, so if you’re not certain about whether or not you’re equipped to do it, it might be best to leave it to a professional.
Need Additional Help with Your P2199 Code?
It’s very common to need extra help with the P2199 code. If you’re looking to get more assistance with this code, there are plenty of professionals who can help.
First of all, you should find an auto repair shop in your area. Even though this code doesn’t regularly result in drivability issues that make your car unsafe to drive, it’s still generally a good idea to avoid consistently driving any vehicle with a check engine light on. Plus, a local auto repair shop is just a more convenient way to get help with your vehicle.
This code sometimes also comes with other code issues. The OBD-II database at KBB.com is a great way to get information about all the codes that are coming up on your code scanner.
P2199 Q&A
Common Error Codes
Browse All OBD-II Codes
Get Recall Alerts
All recalls are considered serious. Stay safe. Take care of any recalls ASAP. The good news? Recall repairs are free when performed at a local dealer.