What Is the P0240 Code?
Symptoms
Causes
Seriousness
Can I Still Drive?
Diagnose
Difficulty of Inspecting
Get Additional Help
The P0240 code indicates a problem with the turbocharger or supercharger boost sensor. When the turbocharger or supercharger activates, the Powertrain Control Module (PCM) or Engine Control Module (ECM) must determine how much boost the tool creates. However, this code indicates that the PCM detects an incorrect Boost Pressure Sensor B signal.
More About Error Code P0240
The P0240 code is a circuit range and performance code. Your vehicle may be functioning correctly, with the turbocharger or supercharger giving the right amount of boost. But if the circuit can’t give that information back to the PCM, there’s no way for it to adapt to any changes in the engine process. The good news is that circuit issues are often easier to fix than performance issues.
Who Has the Lowest Price?
Some service centers will give you an online estimate to compare. Why drive around Town!?
What Are the Symptoms of a P0240 Code?
The P0240 error code may have very severe or less severe symptoms, depending on the extent of the problem and how your specific vehicle deals with them. In less-severe cases, you may see reduced engine performance and increased fuel consumption, as the turbocharger or supercharger may shut off entirely. If the problem is more severe, your vehicle may enter Limp Home mode, where you may see an even further lack of power, and the PCM may shut off less-necessary systems, such as your air conditioning system. In any case, you should also see the check engine light turn on.
What Are Some Causes of a P0240 Code?
Several common problems can trigger a P0240 diagnostic trouble code. Turbo booster pressure sensor failure is common, including general deterioration with age, electrical connection issues to the boost sensor, and problems with the turbo boost pressure sensor being contaminated or clogged. An exhaust leak can sometimes cause fluctuating readings from the boost pressure sensor signal, leading to a P0240 code.
How Serious Is the P0240 Code?
Code P0240 is fairly serious overall. The turbocharger or supercharger is an important part of the system, allowing your vehicle to speed up more easily. Additionally, in many cases, the code causes severe drivability issues with the Limp Home mode. Even if you’re not seeing significant drivability issues, the longer you allow your vehicle to stop reading the turbocharger or supercharger information, the more likely there will be issues with driving later.
Can I Still Drive with a P0240 Code?
In many cases, you physically won’t be able to drive very well with the P0240 code active. The Limp Home mode will make it so that your vehicle tops out at a low driving speed, and the PCM may also shut off your air conditioning and certain other systems in the vehicle. Even if you’re not seeing these drivability issues, the associated lack of driving power and fuel consumption increase will make driving frustrating.
How Easy Is It to Diagnose a P0240 Code?
The P0240 code can be difficult. You’ll need to check the operation of the boost pressure sensor harness, the Manifold Absolute Pressure sensor (MAP sensor), the sensor port, the boost pressure sensor lines and hoses, and the boost sensor connector. You should check for visible signs of damage, the signal, and issues within electrical connectors. There are multiple spots where failure can lead to a P0240 code. Diagnosis requires knowing all of these areas and then understanding what it looks like when there’s an issue with the process. This is why many people talk to an expert about the problem.
How Difficult Is It to Inspect a P0240 Code?
The inspection process, as with the diagnosis process, can be difficult. Again, to inspect this problem, you have to know what it looks like when something’s wrong and check through multiple systems for the problem. If you don’t understand the boost pressure sensor and its associated systems with your vehicle’s specific make and model, it will be very difficult to try and inspect the P0240 error code on your own.
Need Additional Help with Your P0240 Code?
Many people will need expert assistance with the P0240 generic trouble code, so knowing how to get help is important.
The first step is to find an auto repair shop in your area. If you’re dealing with Limp Home mode or other drivability issues, you want to find the closest repair shop so you don’t have to drive very far.
Additionally, it’s common for the P0240 code to come with other codes, especially if the problem is not with the sensor itself. KBB.com’s OBD-II database provides information about all the codes you might be experiencing in your vehicle.
P0240 Q&A
Common Error Codes
Browse All OBD-II Codes
Get Recall Alerts
All recalls are considered serious. Stay safe. Take care of any recalls ASAP. The good news? Recall repairs are free when performed at a local dealer.